ICUMSA Sugar Grades and VHP: A Buyer’s Guide
ICUMSA colour numbers help describe sugar, but they do not replace a complete product specification. This guide explains how buyers can distinguish colour requirements from processing needs and prepare a more useful sourcing enquiry.
ICUMSA 45, 100, 150 and 600–1200 refer to colour-related specifications, not a universal ranking of sugar quality. VHP means Very High Polarization and describes a raw sugar product, rather than another point on that colour scale. A buyer should specify the intended use, analytical limits and delivery requirements together before comparing offers.
What an ICUMSA number actually tells you
ICUMSA colour is a laboratory measurement of a prepared sugar solution, expressed in ICUMSA Units, or IU. Its definition uses light absorption at a specified wavelength. On a comparable measurement basis, a lower result indicates less colour in the solution; it is not a percentage of purity. ICUMSA colour definition
The measurement method matters. ICUMSA publishes different colour methods with defined application ranges and preparation conditions. Buyers should therefore ask for the method reference alongside the result, rather than comparing numbers from unidentified tests. For example, its GS2-9 method covers a different application range from GS1-7, which addresses higher-colour sugars and syrups. GS2-9 and GS1-7
For procurement, treat the advertised number as an invitation to read the specification. Establish whether it is a contractual maximum, a typical value or an indicative description. Those are different commitments. A product described only as “ICUMSA 45” still leaves important questions unanswered.
Reading 45, 100, 150 and 600–1200 without guessing
The useful comparison is the buyer’s permitted colour limit against the offered specification, not a claim that one number is best for every application.
ICUMSA 45: Ask whether the offer commits to a maximum of 45 IU, which test method applies and what other characteristics are guaranteed. Do not interpret the label alone as proof of a particular origin, certification or manufacturing process.
ICUMSA 100: If 100 IU is the agreed maximum, it permits more solution colour than a 45-IU maximum on a comparable basis. Whether that is acceptable depends on the buyer’s product and approval requirements.
ICUMSA 150: Apply the same approach. Confirm the limit, method and full specification instead of assuming that “150” automatically identifies a distinct, universally defined product category.
ICUMSA 600–1200: This is a broad range, not one interchangeable grade. Ask whether the seller means a result within that interval, several available specifications or simply an indicative range. A buyer requiring a 600-IU maximum should not treat a possible 1,200-IU result as equivalent.
These are practical ways to interpret an offer, not substitute product standards. Do not automatically rename a sugar “raw,” “brown,” “refined” or “food-grade” from its colour number alone. Obtain the actual product description and acceptance specification.
Why VHP belongs in a separate conversation
VHP stands for Very High Polarization. Sugar producer Raízen describes it as a raw product that can provide a base for refining and other processes. That makes the intended processing route central to a VHP enquiry. Raízen sugar overview
Do not assume that VHP is simply another name for ICUMSA 600–1200. One term describes a product type; the other expresses a colour range. They do not establish an automatic equivalence, nor do they supply all the acceptance parameters a refinery needs.
A refinery or processor evaluating VHP should provide its required analytical specification and handling requirements. A buyer seeking sugar for direct incorporation into a finished food should separately establish whether the offered product is suitable for that use without further processing. Neither a familiar abbreviation nor an attractive price resolves that question.
Match the specification to the buyer’s application
Codex’s sugar standard distinguishes products using characteristics beyond colour, including composition and polarisation. It also addresses such matters as hygiene, contaminants and labelling. This illustrates why a colour number should not stand in for a complete food or procurement specification. Codex Standard for Sugars
A practical starting point is to ask the buyer’s technical team what the sugar must do in the finished process:
A beverage manufacturer should identify any colour, clarity and process-specific acceptance requirements.
A bakery or confectionery buyer should state its required product form, crystal characteristics and production-line needs.
A packer or distributor should specify the intended market, pack format and labelling requirements.
A refinery should provide its feedstock and processing criteria rather than requesting a colour number alone.
These are enquiry questions, not a recommendation that a particular grade automatically suits those industries. Ask for an agreed specification covering relevant parameters such as polarisation, moisture, ash, reducing sugars and grain size. Include any buyer-required microbiological, certification or traceability documentation. Have the buyer’s technical team determine which tests and limits are necessary.
Where appropriate, establish sample approval before committing to volume. Record what was approved, which specification it represents and how shipment conformity will be assessed. A sample photograph cannot establish laboratory colour or other analytical results.
Prepare a bulk sugar enquiry that can be assessed
A clear enquiry reduces avoidable exchanges and makes proposed offers easier to compare. Include:
Product and grade: Sugar type, requested ICUMSA limit or range, test method if prescribed, and whether VHP or another specifically described product is required.
Quantity: Tonnes per shipment, expected total volume and whether the requirement is a trial, one-off purchase or proposed recurring programme.
Packing: Required bag or bulk format, pack weight, pallet preferences and any labelling needs. State requirements rather than assuming every format is available.
Destination: Country and named delivery port or place, with any known receiving constraints.
Commercial basis: Requested Incoterm, named port or place and applicable edition, together with the desired shipment window.
Technical documents: Buyer specification, intended use, required certificates and proposed sampling or inspection requirements.
For example: “Please assess our requirement for sugar meeting the attached specification, maximum [X] IU, [quantity] tonnes, packed in [format], for delivery to [named destination] under [Incoterm and edition], with shipment requested in [period].”
Treat the first response as a proposal to evaluate, not evidence that every requirement has already been satisfied. Before proceeding, reconcile the specification, documentation, delivery terms and acceptance process in writing. Choosing sugar well means choosing the right fit for the application, not simply the lowest colour number.
Is ICUMSA 45 always better than ICUMSA 150?
No. A lower colour limit may be important for a particular application, but colour alone does not establish overall suitability, safety or compliance with a buyer’s specification.
Does ICUMSA 100 mean 100 per cent pure sugar?
No. ICUMSA Units describe a colour measurement; they are not a percentage-purity scale.
Is VHP the same as ICUMSA 600–1200?
No automatic equivalence should be assumed. VHP identifies a raw sugar type, while 600–1200 describes a colour range that must be clarified in the specification.
What should I send with a sugar sourcing enquiry?
Provide the product specification, grade or colour limit, quantity, packing, destination, requested Incoterm and shipment timing. Include the intended use and required documents so suitability can be assessed.
Send M.O. Marina your required sugar grade, quantity, packing, destination and Incoterm, together with your technical specification, for an initial sourcing enquiry.
This article is general information, not legal, tax, investment or customs advice. Requirements vary by country and transaction; confirm them with the relevant authority and your advisers.